Thursday, February 4, 2010

5th Panzer Regiment, DAK

Planning this unit was fairly simple as there are excellent and acessable OoB sources for the 5th Panzer Regiment on-line. Again, I'm following my "universe slightlty to the left of us" philosophy and building an historic-ish 5th PzRgt rather than a perfect snapshot of the unit. The original mix of tanks is set for the Crusader-Gazala Battles period and includes 2 companies of Pz Mk II, 4 companies of Pz Mk III short 50s, 2 companies of PZ Mk IV short 75s, a Headquarters unit (on the circular base) and a composite recon company (on the house-shaped base).

O8 Pz IV shorts come with two different command tanks (both have the commander un-buttoned, one sitting and one standing in his turret) and they make nifty 1939-1942 command tanks. I added a MkII on the HQ's base as well. The recon unit gets one Pz Mk II and two motorcycle-sidecar combos.

The process for building this unit was much the same as that used for the British. First off, bases were spackled with Vallejo Sandy Paste, then the tanks were glued down and a base coat of Orange Ochre acrylic paint was applied. Once this was dry, Skin wash was applied over everything, followed by Sienna wash near the tanks. At this point, I was going for a light-colored tank on a dark-colored base.

The tanks and bases were then drybrushed with Sand, Highlight Afrika Korps and finally Dark Flesh. Note the needle in the picture: it's there to pluck out bruch hairs which detach during drybrushing. At this scale, they are very noticeable.

Finally, I pin-pointed highlights with Higlight Afrika Korps. The purpose of this is to smooth out the drybrushing and make the figure look less scratchy. You can see the effect in the above photo as the recon and command stands there have already been through the process while the combat companies haven't. Here's a picture of the whole regiment after the treatment was completed:

Now on to detailing. As was the case with the Brits, I'll paint black under gun barrels and sienna wash any bare or light spots on the treads. Tank commanders are painted black, highlighted grey and given a Dark Flech face. I then add in some red and white highlights here and there. Again, this scale is too small to see numbers and national markings. The bits of red and white, however, really make the models jump out and so are worth adding, even if they are too big for history. After detailing, I varnished the models with flat varnish.

Base flocking turned out to be difficult for this unit. As I've mentioned before, my philosophy is to base darker or lighter than the model, in order to make the miniature stand out. As you can see, above, this didn't work well in this case.

What I finally decided to do was a three part flocking method.

About 70% of the base gets covered in fine yellow flock, with 20-25% (generally the areas closest to the tanks) covered in fine dark brown flock. Another 5-10% of the base is left unflocked. Finally, bits of green flock are added here and there. The result is as follows:


  1. Holy Moly! tank commanders visible at this scale.....!

    As before, a fantastic job, the final flocking really lifted the whole....superlative.....wish my 1/300th looked as good as this.

    Looking forward to seeing Ariete, cheers, SteelonSand.

  2. This comment has been removed by the author.

  3. FUNtastic stuff!! Minis and bases are looking great. Big A+. Where did you get bases and what are they made of? Balsa? Cork? I think I have to repaint my African stuff... :)


  4. The bases are 25mmx25mm 1mm thick clear plastic with rounded corners made by Litko. You can order them through, I believe

  5. The base edges aren't even painted, btw. The brown coloring is simply color refracted off the bottom of the base and through the plastic.